DIY Washi Tape Script Cards


Looking for a lovely way to say hello? A sweet floral script card is perfect for sending Spring greetings! You'll need a bit of patience to cut and stick the washi appliqué onto your card, but I think it's well worth it.

Here's how to make your own:

1. Start by selecting the word and font you want to use. A simple script which is a little bit chunky is perfect. You also want a few good loops in there, but nothing too fancy - you do have to cut it out and transfer the tape onto a card.

2. Once you've found the perfect font (I chose this one), type out your word and size it to match the size of your card (this is 250pt on a 5x7" card). Print out a mirror image copy of the word.



3. Place word face down on a piece of parchment paper or waxed paper and tape into place. If there is a side of the paper you prefer to use for creating washi tape appliqués, you want the word to be taped onto that side.

4. Flip the piece of paper over and trace around the word with a fine marker. Remove print out and set aside.


5. Cover the right side of the paper (side that you haven't written on) with strips of overlapping washi tape. Start from the bottom and work your way up, ensuring that you match up the pattern where possible and that strips overlap slightly.

6. Using scissors, carefully cut around the traced outline of the word. Once the outline is complete, use a craft knife to cut out any enclosed spaces or other delicate spots.



7. When your washi word is fully cut out, it's time to apply it to your card. Starting from the bottom left, very carefully peel the word off of the paper backing and stick to the front of the desired card. You can peel off the entire word in one go, or slowly peel and stick one letter at a time until the entire word is on the front of the card. Make sure to always peel in the direction from the bottommost strip to the topmost to ensure that the strips do not come apart.



Fairly simple, right?

What would your cards say?